Acme PP-32 - Manual (Page 47)

47
PP-32
KOOLMASTER PP-32
REV.01
5.11.2 Adjusting Starting Day of Clock Programs
Clock outputs 1 and 2 use up to 8 programs. The user must select the
day at which each program starts (this day number is directly related to
the animal age). When a new program starts, the previous program is
deactivated.
Set the function to "11.Clock Times" from the main menu using the
navigation buttons then press the right-arrow key. This menu is only
available if clock outputs have been enabled in the installation setup
(see sec. 5.14.3).
Press the right-arrow key once
again to select the "1.Start/Stop"
menu.
Use the navigation buttons to select
clock output 1 or 2 then press the
right-arrow key.
Use the navigation buttons to select
the desired program then press the
right-arrow key. The animal age at
which the selected program starts
flashes on the display.
Use the adjustment buttons to set
the age at which the selected
program will start.
Proceed in similar fashion to adjust
the start age for each program of clock outputs 1 and 2 (if appli-
cable).
Clock Time
Start / Stop
1. Clock 1
2. Clock 2
Clock Time
Start / Stop
1. Program 1
2. Program 2
Clock 1 Program 1
Animal Age: 1
On 1 8:00A (1)
Off 1 8:30A (1)