Acme PP-32 - Manual (Page 30)

30
PP-32
KOOLMASTER PP-32
REV.01
Use the adjustment buttons to set the outside temperature below
which the second group of static pressure set points start to be
used.
Press the down-arrow key once, the LO static pressure set point #2
(Close At) is selected .
Use the adjustment buttons to adjust the 2nd low static pressure set
point (Close At) to the desired value then press the down-arrow key.
The HI static pressure set point #2 (Open At) is selected.
Use the adjustment buttons to adjust the 2nd HI static pressure set
point (Open At) to the desired value.
Press the left-arrow key to exit this menu.