Acme PP-32 - Manual (Page 62)

62
PP-32
KOOLMASTER PP-32
REV.01
Installer Password
code #1 1
code #2 1
code #3 1
Modifying the Installer's Password
The installer's password must first be entered before being allowed to
modify it. Proceed as explained above to enter the installer password
(1-1-1 by default).
Note : The password "1-2-3" is reserved for the user mode. Do not use
the same number sequence for the installer password.
Set the function to "19.Installa-
tion" from the main menu using the
navigation buttons. Press the right-
arrow key. Note that this menu is
only accessible from the installer
mode (refer to the previous section
to enter the installer's password).
Press the down-arrow key and scroll
the display until you reach the
Installer's Password menu.
Use the adjustment buttons to
adjust all three numbers of the
installer's password.
Once the new Installer Password is correctly set, press the left-
arrow key to exit this menu.
Installation
Clear Alarms? No
Reset Min/Max 11:00A
Use RH? Yes