Acme PP-32 - Manual (Page 61)

61
PP-32
KOOLMASTER PP-32
REV.01
Password
Enter password:
01 ** **
5.14.2 Password Settings
This function allows to identify 2 different user types. It is used to
restrict the access to certain parameters. The password is made up of
three blocks of two digits, for example: 13 44 21. When a correct
password is entered, the current user is identified.
Installer Password: By default, the INSTALLER PASSWORD is set to
"01-01-01". The installer mode gives full access to all functions of the
PP-32. The controller automatically returns to the user mode after 15
minutes of inactivity. The installer may return to the user mode before
that delay by entering the user password. The installer's password can
be modified.
User Password: The user mode gives access to the basic functions of the
PP-32. By default this password is set to "01-02-03". Some menus will
not be accessible from this mode.This password cannot be modified. The
control automatically goes back to the user mode after 15 minutes of
inactivity.
Entering the Installer's Password:
Set the function to "22.Password"
from the main menu using the
navigation buttons then press the
right-arrow key. The current user
mode is displayed.
Press the right-arrow key once
again to enter a password. The
first two-digit number are flashing.
Use the adjustment buttons to set
the first number. Press the right-
arrow key once, the second two-
digit number is selected. Use the adjustment buttons to set the
second number. Proceed in similar fashion to set the third two-digit
number. Press the right-arrow another time to validate the whole
password.
If the entered password is incor-
rect, the error message “Wrong
Password” is displayed.
Password
Wrong password!
Password
Current mode:
User 1