5 double inputs for rtd, thermocouple and voltage, 6 output, 7 general data – INOR PROFIPAQ-L User Manual
Page 14: 8 environment conditions (also see ex data), 9 resolution and accuracy

14
2.7.4 Input Voltage
Low range
-10 to +100mV
High range
-10 to +1000mV
Customized linearization
Up to 50 points
Input impedance
>10 MΩ
Maximum sensor wire resistance
500 Ω(total loop)
2.7.5 Double inputs for RTD, Thermocouple and Voltage
Differential
Output value:
Ch1 - Ch2 or Ch2 - Ch1
Average
Output value:
0.5 * (Ch1 + Ch2)
Average with redundancy
Output value:
0.5 * (Ch1 + Ch2), Ch1 or Ch2 if the other one is
broken
Minimum
Output value:
Min (Ch1, Ch2)
Maximum
Output value:
Max (Ch1, Ch2)
2.7.6 Output
Serial output
Acc. to IEC 1158-2
Cyclic communication w. Master Class 1
Measured
values,
status information
Response time
~100 ms
Acyclic communication w. Master Class 2
Measured values, status information and transmitter
configuration
2.7.7 General data
Adjustable damping time
0 to 60 s
Update
time
~200
ms
Isolation
1500 VAC 1 min, Ex 500 VAC 1min.
Intrinsic safety
ProfIPAQ-HX
ATEX: II 1G / 2D, FISCO, Ex ia IIC T4-T6
FM (Approvals pending): Class I-III, Div. 1, Gr. A-G,
FISCO
Non-Incendive
ProfIPAQ-H
ATEX: II 3 GD, FNICO, Ex nL IIC T4-T6
FM (Approvals pending): Class I-III, Div. 2, Gr. A- G,
FNICO
Power supply
From segment coupler
9 to 32 VDC, Non-I.S. appl. (30 VDC Non-Incendive)
9 to 17.5 VDC, I.S. applications
Current
consumption
~11mA
FDE (Fault Disconnect Equipment) <22mA
Connection head
DIN B or larger
2.7.8 Environment conditions (also see Ex data)
Ambient temperature
Storage
-40 to +85°C
Operating
-40 to +85°C
2.7.9 Resolution and Accuracy
Resolution
Resistance, 0 to 400 Ω
5 mΩ
Resistance, 0 to 4000 Ω
50 mΩ
Voltage, -10 to 100 mV
0.5 µV
Voltage, -10 to 1000 mV
5 µV
RTD and Thermocouple
Depends on sensor type
Accuracy
Resistance, 0 to 400 Ω
40 mΩ(@ 25°C incl. calibration and linearity errors)
Resistance, 0 to 4000 Ω
400 mΩ
Voltage, -10 to 100 mV
10 µV
Voltage, -10 to 1000 mV
100 µV
RTD and Thermocouple
See table below
Cold Junction Compensation (CJC) Internal comp.
±0.25°C
Remote comp. (Pt100)
Acc. to spec. for RTD
Temperature influence
RTD and Thermocouple
±0.005°C/°C
Resistance and Voltage
±0.0005 %FSR/°C
Temperature influence CJC
Internal comp.
±0.02°C/°C
Remote comp. (Pt100)
Negligible
Sensor wire influence
RTD and Resistance, 2-wire
Adjustable wire resistance compensation
RTD and Resistance, 3-wire
Negligible, with equal wire resistance
RTD and Resistance, 4-wire
Negligible
Thermocouple and Voltage
Negligible
RFI influence 0.15 to 1000 MHz, 10 V/m
±0.5°C
Long-term stability
Better than ±0.5°C / year