INOR PROFIPAQ-L - Manual (Page 10)

10
2.5.3 ProfIPAQ-H/D/-HX/D (Dust)
ProfIPAQ-HX/Dxy and ProfIPAQ-H/Dxy – D indicates it is a dust version with dust tight
connection head.
x indicates type of connection head: y indicates process entry:
x=1 INOR Connection head BI y=1 M24x1,5
x=2 INOR Connection head BS y=2 G ½”
x=3 INOR Connection head DANX (GR-A/BL) y=3 NPT ½”
Figure 7 Connection head BI Figure 8 Connection head BS
Figure 9 Connection head DANX
For dust-applications Category 2D (Zone
21) ProfIPAQ-HX/Dxy with at least IP 65 is
needed. Make sure the correct gasket is
used. Cable entries and blanking
elements, suitably Ex certified and
correctly installed, shall be used.
For dust-applications Category 3D (Zone
22) ProfIPAQ-H/Dxy with IP 54 is used.
Cable entries and blanking elements,
suitably Ex certified and correctly installed,
shall be used.