Figure 6-10: calibration initiation screen, Figure 6-11: calibration screen – IEI Integration TDM_Series v2.01 User Manual
Page 75
TDM Series Monitor
Page 61
Step 7:
Double click the PenMount 6000 icon as shown in Figure 6-9.
Step 8:
The calibration initiation screen in Figure 6-10 appears.
Step 9:
Select the Standard Calibration button as shown in Figure 6-10.
Figure 6-10: Calibration Initiation Screen
Step 10:
The calibration screen in is shown. See Figure 6-11.
Figure 6-11: Calibration Screen
Step 11:
Follow the instructions. The user is asked touch the screen at five specified
points after which the screen is calibrated.
Step 0: