IEI Integration TDM_Series v2.01 - Manual (Page 4)

TDM Series LCD Monitor
Page IV
Safety Precautions
WARNING:
When the ambient temperature is above +50°C, please do the following:
ƒ Only use monitors with a DC terminal block for power
ƒ Place the monitor in a secure area accessible only to trained
service persons
The monitor can operate in ambient temperatures up to +50°C; however, in
such environments the temperature of the LCD monitor can be in excess of
+70°C. When the monitor is installed in such environments, please strictly
adhere to the two operational guidelines listed above.
ƒ Prior to installing, moving, and modifying the monitor, make sure the power is
turned off and the power cord is disconnected.
ƒ Do not apply voltage levels that exceed the specified voltage range. Doing so
will cause fire or an electrical shock.
ƒ Electric shocks can occur if the panel is opened. Do not drop or insert any
objects into the ventilation openings of the monitor.
ƒ Only qualified engineers from certified system integrators or VARs are
allowed to make necessary functional modifications to the monitor, e.g.,
adding a touch screen. IEI offers the customization service on a per-order
basis.
ƒ Designs with stand-alone and fault-tolerant hardware considerations should
be implemented using the series models as a critical alarm or production line
control.
ƒ If considerable amount of dust, water, or fluids entered the monitor, turn off
the power supply immediately, unplug the power cord, and contact the monitor
vendor.