3 wall mounting, Figure 4-11: install into a cabinet/rack – IEI Integration TDM_Series v2.01 User Manual
Page 54
TDM Series Monitor
Page 40
Step 5:
Slide the monitor with the attached rack mount kit into a rack or cabinet
(Figure 4-11).
Figure 4-11: Install into a Cabinet/Rack
Step 6:
Once the monitor with the attached cabinet/rack has been properly inserted into
the rack or cabinet, secure the front of the rack/cabinet bracket to the front of the
rack or cabinet (Figure 4-11).
4.5.3 Wall Mounting
To mount the TDM series industrial monitor onto a wall, please follow the steps below.
Step 1:
Select a location on the wall for the wall-mounting bracket.
Step 2:
Carefully mark the locations of the four bracket screw holes on the wall.
Step 3:
Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.