IEI Integration TDM_Series v2.01 - Manual (Page 42)

TDM Series Monitor
Page 28
4.2.3 Packing List
All the monitors in the TDM series are shipped with the following components:
ƒ TDM-121GMS / TDM-121GMS/T-R / TDM-150GMS / TDM-150GMS/T-R
industrial LCD monitor
ƒ 1 x Power cable for terminal block
ƒ 1 x VGA cable
ƒ 1 x Screw set
ƒ 1 x User manual on CD-ROM
ƒ 1 x Touch screen RS-232 cable / touch pen / driver CD-ROM (T-R models
only)
ƒ *1 x 45W AC power adapter with AC 90V ~ 264V @ 1A input and DC +12V
@3.75A output / AC power cord
ƒ * External 45W power adapter only supports 0°C ~ 40°C operating
temperature
ƒ If any of these items are missing or damaged, contact the distributor or sales
representative immediately.
4.3 Pre-installation Preparation
4.3.1 Tools
Before installing the TDM series industrial monitor, make sure the following tools are on
hand:
ƒ Phillips (crosshead) screwdriver: All the retention screws on the system are
Phillips screws.
ƒ Soft working mat: When the TDM series industrial monitor is installed, the
screen is placed on the working surface. It is therefore important to rest the
MPC industrial workstation on a soft at that cannot damage the LCD screen
on the front of the TDM series industrial monitor.