beautypg.com

4 get mifare parameter, Figure 3-6: get mifare parameter, Table 3-8: set mifare parameter response format – IEI Integration ACT-457A User Manual

Page 46: Figure 3-4 ), Figure 3-4, Ed in table 3-5 and table 3-6

background image

ACT-457A Panel PC

Page 38

Status (2 digits)

Block Data

END (2 digits)

OK Null

CR,LF

(0x0d,0x0a)

ER

Error Code (3 digits)

CR,LF (0x0d,0x0a)

Table 3-8: Set Mifare Parameter Response Format

3.5.4 Get Mifare Parameter

To read the parameter of a Mifare card reader, please follow the steps below.

Step 1:

Select Get Mifare Parameter in the command area (Figure 3-6).

Step 2:

Click the Execute button to execute the command through the selected serial

port (Figure 3-6). The raw data of this command shows in the Raw Data area in

the format listed in Table 3-9 and Table 3-10.

Step 0:

Figure 3-6: Get Mifare Parameter

Field

Command

End

Digit 2

1

See also other documents in the category IEI Integration Computers: