1 read block, Figure 3-3: read block – IEI Integration ACT-457A User Manual

Page 42

ACT-457A Panel PC

Page 34

The following sections describe how to use these commands.

3.5.1 Read Block

To read the block data from a Mifare card, please follow the steps below.

Step 1:

Select Read Block in the command area (Figure 3-3).

Step 2:

Configure the data, including block, key, key data and time out (Figure 3-3).

Step 3:

Click the Execute button to execute the command through the selected serial

port (Figure 3-3). The raw data of this command shows in the Raw Data area in

Figure 3-3: Read Block

Field

Command Block

KEY

KEY Data

Time Out

End

Digit 2