IEI Integration ACT-457A - Manual (Page 39)

ACT-457A Panel PC
Page 31
3.1 Introduction
The RFID tool is used to configure Mifare cards and EM cards.
3.2 Installation
The RF320 RFID application must be installed from the storage card. To install the
software, follow the steps below.
Step 1: Run the installation file at "\\Storage Card\Apps\RF320.exe"
Step 2: To launch the RF320, click Start menu  Program File  IEI  RF320. S te p 0 :
3.3 RF320 Interface Overview
Figure 3-1: RFID Interface Overview
Label Description
COM Port Settings and Activation Area