beautypg.com

Figure 3-5: set mifare parameter, Table 3-7: set mifare parameter raw data format, Ed in table 3-3 and table 3-4 – IEI Integration ACT-457A User Manual

Page 45

background image

ACT-457A Panel PC

Page 37

Step 2:

Select a Mifare mode.

 0-UUID: read serial number only.

 1-UUID & KEY A: read serial number and use "KEY A" to read "Block' data".

 2-UUID & KEY B: read serial number and use "KEY B" to read "Block data".

Step 3:

Configure the block number, and key data (Figure 3-5).

Step 4:

Click the Execute button to execute the command through the selected serial

port (Figure 3-5). The raw data of this command shows in the Raw Data area in

the format listed in Table 3-7 and Table 3-8.

Step 0:

Figure 3-5: Set Mifare Parameter

Field

Command

Access Mode

Block

KEY Data

End

Digit 2

1

2

12

1

Data SM

0~2

00~63

000000000000

︴(Hex)

FFFFFFFFFFFF

CR (0x0d)

Table 3-7: Set Mifare Parameter Raw Data Format

See also other documents in the category IEI Integration Computers: