IEI Integration ACT-457A - Manual (Page 25)

ACT-457A Panel PC
Page 17
2.6 System Power
The system can be run in the AT power mode or the ATX power mode. Both these power
modes are described below.
2.6.1 ATX Power Mode (Default)
With the ATX mode selected, the ACT-457A panel PC goes in a standby mode when it is
turned off. The panel PC can be easily turned on via network or a power switch in standby
mode. Remote power control is perfect for advertising applications since the
broadcasting time for each panel PC can be set individually and controlled remotely. Other
possible application includes
 Security surveillance
 Point-of-Sale (POS)
 Advertising terminal
2.6.2 AT Power Mode
With the AT mode selected, the power is controlled by a central power unit rather than a
power switch. The ACT-457A panel PC turns on automatically when the power is
connected. The AT mode benefits a production line to control multiple panel PCs from a
central management center and other applications including:
 ATM
 Self-service kiosk
 Plant environment monitoring system
 Factory automation platform
 Manufacturing shop flow
2.7 Mounting the System
The ACT-457A supports the mounting methods shown in the subsections below.
2.7.1 Wall Mounting
To mount the ACT-457A onto the wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.