Figure 2-4: wall-mounting bracket – IEI Integration ACT-457A User Manual

Page 26

ACT-457A Panel PC

Page 18

Step 2:

Carefully mark the locations of the four screw holes in the bracket on the wall.

Step 3:

Drill four pilot holes at the marked locations on the wall for the bracket retention

screws.

Step 4:

Align the wall-mounting bracket screw holes with the pilot holes.

Step 5:

Secure the mounting-bracket to the wall by inserting the retention screws into

the four pilot holes and tightening them (Figure 2-4).

Figure 2-4: Wall-mounting Bracket

Step 6:

Insert the four monitor mounting screws provided in the wall mounting kit into the

four screw holes on the real panel of the ACT-457A and tighten until the screw

shank is secured against the rear panel (Figure 2-5).

Step 7:

Align the mounting screws on the rear panel with the mounting holes on the

bracket.

Step 8:

Carefully insert the screws through the holes and gently pull the monitor

downwards until the ACT-457A rests securely in the slotted holes (Figure 2-5).

Ensure that all four of the mounting screws fit snuggly into their respective

slotted holes.