5 rf320 commands, Rf320, Ommands – IEI Integration ACT-457A User Manual

Page 41: Figure 3-2: rf320 com port settings

ACT-457A Panel PC

Page 33

Figure 3-2: RF320 COM Port Settings

NOTE:

If the Hyper Terminal is used for communication, please setup the port

properties as shown below.

Bits per second: 19200

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

3.5 RF320 Commands

The RF320 provides five commands, including:

 Read Block: read the block data from the Mifare/EM card

 Write Block: write the block data into the Mifare/EM card

 Set Mifare Parameter

 Get Mifare Parameter

 Set RF320 Mode