IEI Integration PPC-51xxA-H61 User Manual
Ppc-51xxa-h61, User manual, Model
Table of contents
Document Outline
- 1 Introduction
- 2 Unpacking
- 3 Installation
- 3.1 Anti-static Precautions
- 3.2 Installation Precautions
- 3.3 Preinstalled Components
- 3.4 Installation and Configuration Steps
- 3.5 Removing the Back Cover
- 3.6 Jumper Settings
- 3.7 Drive Installation
- 3.8 PCI Expansion Card Installation (Optional)
- 3.9 PCIe Expansion Card Installation (Optional)
- 3.10 AT/ATX Mode Selection
- 3.11 Mounting the System
- 3.12 SFP Fiber Module Installation (Optional)
- 3.13 Bottom Panel Connectors
- 3.14 Driver Installation
- 4 System Maintenance
- 5 BIOS Setup
- 6 Interface Connectors
- 6.1 Peripheral Interface Connectors
- 6.2 Internal Peripheral Connectors
- 6.2.1 +12V Power Source Connector (CPU12V1)
- 6.2.2 ATX Power Connector (ATX1)
- 6.2.3 CompactFlash® Card Slot (CF1)
- 6.2.4 DIO Connector (DIO1)
- 6.2.5 Fan Connector (CPU_FAN1/SYS_FAN1/SYS_FAN2/SYS_FAN3)
- 6.2.6 I2C Connector (I2C_1)
- 6.2.7 Internal Audio Connector (SPKL1)
- 6.2.8 Internal Audio Connector (SPKR1)
- 6.2.9 Internal Power Button Connector (PWR_SW1)
- 6.2.10 Internal Power Button Connector (PWR_SW2)
- 6.2.11 K Type Thermocouple Connectors (K_TYPE1/K_TYPE2)
- 6.2.12 LVDS Backlight Connector (INVERTER1)
- 6.2.13 LVDS Connector (LVDS1)
- 6.2.14 PCIe Mini Card Slot (MINI_PCIE1)
- 6.2.15 SATA 3Gb/s Connectors (SATA1/SATA2)
- 6.2.16 SATA Power Connectors (JSATA_PWR1/JSATA_PWR2)
- 6.2.17 SFP Fiber LED Connector (F_LED1)
- 6.2.18 SMBus Connector (SMBUS_1)
- 6.2.19 SPI Flash Connector (JSPI1)
- 6.2.20 Touch Panel Connector (TOUCH1)
- 6.2.21 USB 2.0 Connectors (USB1/USB2/USB3/USB4)
- 6.3 External Interface Panel Connectors
- 6.4 Preconfigured Jumper Settings
- 6.4.1 CF Card Power Selection Jumper (JP1)
- 6.4.2 CPU Fan Type Selection Jumper (JCPUFAN1)
- 6.4.3 Inverter Brightness Voltage Selection Jumper (J_ADJ1)
- 6.4.4 LCD Power Selection Jumper (JLCD_PWR1)
- 6.4.5 Panel Type and Resolution Selection Jumper (JLCD_SET1)
- 6.4.6 Pull High/Low Selection (for RS-422/485 only) Jumper (UART_SEL1)
- 6.4.7 System Fan Type Selection Jumper (JSYSFAN1/JSYSFAN3)
- 6.4.8 Touchscreen Selection Jumper (JTOUCH1)
- 6.4.9 USB1~USB4 Power Selection Jumpers
- A BIOS Configuration Options
- B One Key Recovery
- C Safety Precautions
- D Watchdog Timer
- E Hazardous Materials Disclosure