IEI Integration PPC-51xxA-H61 - Manual (Page 102)

PPC-51xxA-H61 Panel PC
Page 87
Î
Disabled
Disable the serial port
Î
Enabled D EFAULT
Enable the serial port
Î Device Mode [Normal]
The Device Mode option is used to set the Serial Port 5 signaling mode.
Î
Normal D EFAULT
Sets the serial port mode to normal.
Î
RS422/
RS485
Enables serial port RS-422/485 support.
Î Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Î
Auto D EFAULT
The serial port IO port address and interrupt address
are automatically detected.
Î
IO=2D0h;
IRQ=10
Serial Port I/O port address is 2D0h and the interrupt
address is IRQ10
Î
IO=2C0h;
IRQ=10, 11
Serial Port I/O port address is 2C0h and the interrupt
address is IRQ10, 11
Î
IO=2C8h;
IRQ=10, 11
Serial Port I/O port address is 2C8h and the interrupt
address is IRQ10, 11
Î
IO=2D0h;
IRQ=10, 11
Serial Port I/O port address is 2D0h and the interrupt
address is IRQ10, 11
Î
IO=2D8h;
IRQ=10, 11
Serial Port I/O port address is 2D8h and the interrupt
address is IRQ10, 11
Î
IO=2E0h;
IRQ=10, 11
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ10, 11