IEI Integration PPC-51xxA-H61 - Manual (Page 75)

PPC-51xxA-H61 Panel PC
Page 60
Step 2: Align the VGA connector . Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
PPC-51xxA-H61. See
7
Figure 3-41 .
Figure 3-41: VGA Connector
3.14 Driver Installation
NOTE:
The content of the CD may vary throughout the life cycle of the product
and is subject to change without prior notice. Visit the IEI website or
contact technical support for the latest updates.
All the drivers for the PPC-51xxA-H61 are on the CD that came with the system. To install
the drivers, please follow the steps below.
Step 1: Insert the CD into an optical disk drive connected to the system.