IEI Integration PPC-51xxA-H61 - Manual (Page 39)

PPC-51xxA-H61 Panel PC
Page 24
ƒ Mounting: The PPC-51xxA-H61 is a heavy device. When mounting the
system onto a rack, panel, wall or arm, please make sure that at least two
people are assisting with the procedure.
ƒ Anti-static Discharge: If a user open the rear panel of the panel PC, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
3.3 Preinstalled Components
The following components are all preinstalled.
ƒ Motherboard
ƒ DDR3 memory module
ƒ TFT LCD
ƒ Touchscreen
ƒ Power supply
ƒ Inverter board
ƒ System cooling fans
Preinstalled OEM customizations may include the following.
ƒ CPU
ƒ HDD
ƒ Wi-Fi module
ƒ Optical disk drive
ƒ PCI/PCIe x1 riser card
3.4 Installation and Configuration Steps
The following installation steps must be followed.
Step 1: Unpack the PPC-51xxA-H61.
Step 2: Set the jumper settings.
Step 3: Install HDD, CompactFlash® card and optical disk drive.
Step 4: Mount the PPC-51xxA-H61 panel PC.