beautypg.com

2 install the new psu, Figure 4-8: psu bottom panel retention screws, Figure 4-9: psu bottom panel screws – IEI Integration PPC-51xxA-H61 User Manual

Page 83

background image

PPC-51xxA-H61 Panel PC

Page 68

Step 4:

Unfasten the screws on the inside panel (

8

Figure 4-8

).

Figure 4-8: PSU Bottom Panel Retention Screws

Step 5:

Remove the retention screws that connect the PSU bracket to the chassis

(

8

Figure 4-9

).

Figure 4-9: PSU Bottom Panel Screws

Step 6:

Remove the retention screws that connect the PSU to the PSU bracket.

Step 0:

4.6.2 Install the New PSU

Installation is done in the reverse order to removal. To install a new PSU module, please

follow the steps below.

Step 1:

Attach the PSU bracket to the PSU module with the previously removed

retention screws.

Step 2:

Insert the PSU module and bracket assembly into the chassis and attach the

PSU bracket to the chassis with the previously removed retention screws.

See also other documents in the category IEI Integration Computers: