10 at/atx mode selection, At/atx, Election – IEI Integration PPC-51xxA-H61 User Manual

Page 57: Figure 3-20: installing the pcie card, Figure 3-21: at/atx mode selection

PPC-51xxA-H61 Panel PC

Page 42

Step 5:

Secure the expansion card

. Once the PCIe card is correctly installed in the

system, reinsert the previously removed retention screw to secure the card to

the I/O interface panel.

Step 0:

Figure 3-20: Installing the PCIe Card

3.10 AT/ATX Mode Selection

AT and ATX power modes can both be used on the PPC-51xxA-H61 panel PC. The

selection is made through an AT/ATX switch on the I/O interface panel. The switch is

shown below.

Figure 3-21: AT/ATX Mode Selection