IDEC DATAVS2 Series - Manual (Page 44)

SVS2 Series Instruction Manual
39
It is possible to set more complex inspection processes, with acquired images processed in parallel
undergoing simple or complex measurements/controls at the same time, with the results connected to
different outputs:
Or the output may be dependant on the result of all controls/measurements: if so, the inspection will
only give a positive outcome when all controls/measurements included in it return a positive result.
The following paragraphs provide a description of each individual control with the following details:
• Description: Control operation;
• Selection: menu from which control is selected;
• Pointer shape: to facilitate positioning, each control uses a different pointer;
• Positioning: how to position and size the ROI;
• Parameters: description of configuration parameters;
• Result: description of outcome;
• Example: Explains full procedure, from selection, to setup, through to output settings.
Acquired
Image
Control /
Measurement
No. 1
Control /
Measurement
No. 2
Control /
Measurement
No. 3
Output no. 1
Pass / Fail
Output no. 2
Pass / Fail
Output no. 3
Pass / Fail
Control /
Measurement
No. 1
Control /
Measurement
No. 2
Control /
Measurement
No. 3
Acquired
Image
Output no. 1
Pass / Fail