IDEC DATAVS1 Series - Manual (Page 71)

Instruction Manual SVS1 Series
66
10. CHECKS AND PERIODIC MAINTENANCE
Correct maintenance consists in the removal of dust or foreign objects from the sensor.
Remove any dust build-up from sensor body using a soft cloth; if needed, dampen cloth slightly with a
mild detergent solution.
To clean off dust and fingerprints from the lenses, use an anti-static compressed air can. Use a cloth
and a specific lens detergent to remove any residue.
Avoid using:
• detergents which contain alcohol or solvents
• wool or synthetic cloths
Please refer to the Datasensor S.p.A. website (www.datasensor.com) to check for any new updates
for the configuration software. To check the software version and date on your system, please access
the System menu Version.
10.1. Warranty
The product you purchased is warranted to be free from manufacturing defects for a period of 36
(thirty-six) months from date of manufacture.
Warranty does not cover damage and defects resulting from improper use of the sensor or accidental
damage due to shock or in the event the product is dropped.
The sensor contains cutting-edge electronic components that cannot be repaired or replaced by the
final user. Do not dismantle the device or make any changes to its components or the warranty will
become null and void.
Datasensor S.p.a. may not be held liable for damage to persons or property resulting from failure to
comply with the provisions reported herein.
In the event of problems, contact the after sales /repair service of DATASENSOR S.p.A.
Service Department
Tel.:
+39 051 6765611
Fax.: +39 051 6759324
email: [email protected]