IDEC DATAVS1 Series - Manual (Page 40)

Instruction Manual SVS1 Series
35
6.6. Menu mode
It is possible to select which interface to use during configuration of the inspection tool. The user can
choose from two different options:
Standard
Only the main configuration settings can be accessed
Expert
All the settings can be selected and modified by the user
All the parameters which can be set by the user are listed individually in the next chapter. The settings
which can only be accessed in expert mode are marked with the symbol
.
6.7. Password
In the password menu the user can set a password to protect the system. This protects the sensor
against accidental or unauthorised modifications. The password is disabled by default. To set a new
password, use the ARROW buttons to select Enable and then press SET to confirm.