IDEC DATAVS1 Series - Manual (Page 54)

Instruction Manual SVS1 Series
49
Now let's save the bank on the sensor. Enter the Bankset menu and save the inspection in
memory bank 1.
Press the ESC button to return to Monitor mode.
7.5. Width
• Description
This control is also termed "gauge" and lets you measure the distance between two points.
The edge detection techniques (
) are used to detect the edges of an object, and calculate the
distance between the edges.
• Selection
• Positioning
Select the control and press SET on the corresponding icon to create the rectangular ROI in the
middle of the field range.