Alps Electric MD-5000P - Manual (Page 78)

Various Printing Operations
78
5. When you complete the setup, click OK to close the dia-
log box.
Step 4
❿ ❿ ❿ ❿ ❿
Print
1. Click OK in the Print dialog box.
Printing will begin.
Step 5
❿ ❿ ❿ ❿ ❿
Transfer the Image to Paper using an Iron
Transfer the image to paper (using an iron) after printing on the
back print film is completed.
1. Cut around the printed image as close to the edges of the
image as possible.
2. Place the film on paper with the image in contact with the
paper. Place the finishing sheet on top and apply even
pressure with an iron.
Note
•
Use paper larger than the size of the image.
•
Taking care not to let the film slip, firmly apply pressure with
the iron until the image is completely attached to the paper.
Back Print Film fits on the paper
Back Print Film
Paper Paper
Back Print Film
Back Print Film extends
beyond the edge of the paper
Finishing Sheet
Back Print Film
Paper to transfer the image to
Finishing Sheet
Back Print
Film
Paper to transfer
the image to