Alps Electric MD-5000P - Manual (Page 18)

18
Various Printing Operations
18
Step 3
❿ ❿ ❿ ❿ ❿
Load the Photographic-Quality Labels in Your Printer
You may use either automatic feed mode or manual feed mode to
load the paper into your printer.
1. For manual feed mode, set the paper feed switch to posi-
tion "M"; for automatic feed mode, set it to "A".
Paper feed switch “A” Paper feed switch “M”
2. For automatic feeding, load the guide sheet supplied with
the paper into the sheet feeder, placing the printed side
facing down. Then, place the Photographic-Quality Labels
on the guide sheet. Only the glossy side of the Photo-
graphic-Quality Labels is printable, so be sure to load the
sheets with the glossy, printable side up. When handling
sheets, hold the bent top of the guide sheet only to avoid
smearing or discoloring the glossy printing surface.
3. Adjust the paper feed guide to the width of the paper.
4. For manual feeding, load one sheet of paper in the sheet
feeder, and press the
ready / insert button.
ready / insert
Note
Only the glossy surface of paper can be subjected to Photo-
graphic-Quality printing. Since the opposite surface cannot be
printed on, make sure the paper is correctly orientated.
guide sheet