I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 82)

81
PATTERN TOUR
The dome supports 4 pattern tours and each
pattern cover at most 10 Minutes of 500
commands. Please check the following steps to set
up a pattern.
1)
PATTERN NO.: Move the cursor here and
press IRIS OPEN to enter the setup of Pattern
Number. Move the joystick to select a pattern
number (14) and press IRIS OPEN to confirm.
2)
TITLE: Move the cursor here and press IRIS
OPEN to enter the setup of Pattern Title. Check
the detailed above in DOME TITLE settings.
3)
: Move the cursor here and press IRIS
OPEN to enter. Move the dome up/down/left
right, make the zoom in/out and press IRIS
OPEN to save the pattern tour.
4)
START: Move the cursor here and press IRIS
OPEN to start the current pattern tour.
5)
DELETE: Move the cursor here and press
IRIS OPEN to delete the current pattern tour.