I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 23)

22
4.2 Setting IP camera for Witness Pro NVR software
Click “ Start “ >> “ All Programs” >> “Witness NVR32 Pro”, then select the
“ Video Parameters setup-ezSetup” accessory program to setup the parameters.
You will see the diagram as below
Disable channel: This will disable the selected channel when enable this
function.
Install video codec: Install the video codec, if you connect IP camera at first
time.
Vendor & Model: Select the correct brand and model for the connected IP
camera. You also can select “Onvif” if your IP camera support Onvif
Fig A
Fig B