I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 80)

79
AUTO SCAN
The dome supports 8 groups of auto scan. Please
check the following steps to set up a scan.
1)
SCAN NO.: Move the cursor here and press
IRIS OPEN to enter the setup of SCAN
Number. Move the joystick to select a preset
number (1-8) and press IRIS OPEN to confirm.
2)
TITLE: Move the cursor here and press IRIS
OPEN to enter the setup of SCAN Title. Check
the detailed above in DOME TITLE settings.
3)
: Move the cursor here and
press IRIS OPEN to enter. Move the dome to a
defined position as left limit and press IRIS
OPEN to save this left boundary.
4)
: Move the cursor here and
press IRIS OPEN to enter. Move the dome to a
defined position as right limit and press IRIS
OPEN to save this right boundary.
5)
START: Move the cursor here and press IRIS
OPEN to start the current scan.
6)
SCAN SPEED: Move the cursor here and
press IRIS OPEN to set up the scan speed
ranging 1-30.