I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera User Manual

Page 60

DISPLAY SETUP

Display setup allows the user to define the way to
display the dome titles on the monitor.
The displayed titles are listed as follows:

DOME TITLE: Indicate dome

PRESET: Indicate the dwell time for preset title

MOTION: Indicate the dwell time for auto

function titles (auto scan/auto cruise/pattern tour)

ZONES: Indicate the dwell time for zone titles

DATE/TIME: Display the current date and time

PAN/TILT: Time to display PTZ and zoom info

OTHERS:

ALARM: Time to display alarm in/out info
IR LED INFO: Time to display IR LED info
PROMPT: Display/Disappear prompt info of
Dome Title and Date/Time.

Other setup selections include:

OFF: Title will not be displayed when activated.
ON: Title will be continuously displayed.
2 /5/10SEC: Title will be displayed for 2/5/10
seconds after activation

Move the cursor by joystick to the one you need

to set, and press Open key of IRIS to enter the
item. Move the joystick select the status and
press Open key again to confirm.

Titles can be placed anywhere on the monitor.

This feature allows you to customize the window
of your monitor screen. To set a title position:

a.)

Move the cursor via joystick to the DISPLAY

POSITION, then press Open of IRIS

b.)

Use the joystick to move the title up, down, left,

or right; then press Open key to confirm.

c.)

Move cursor at BACK or EXIT and press OPEN

key to save settings and exit menu.