I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 17)

16
2.4
Cable Description
1)
Network port: Plug the RJ-45 LAN cable. The Green LED on for power OK;
Green LED flash for communication; Yellow LED on for power OK.
2)
Power cable: Connect the DC12V Switching power adapter.
3)
BNC cable: Provide composite video signal for lens focus adjustment.
4)
Audio in (Yellow): Plug in Microphone for audio input.
5)
Audio output (Red): Plug Speaker (Request audio amplify) for audio output.
6)
Alarm in#1: Connect to the sensor input (Dry contact).
7)
Alarm in#2: Connect to the sensor input (Revised).
8)
Alarm out: Connect to the trigger device such as light.
9)
Rest cable: Turn on the power and push button , the parameters of IP camera
become to default setting.