Request sense command (03h) (continued) – Quantum 10K II User Manual
Page 246
SCSI Description
Quantum Atlas 10K II Ultra160/m SCSI Hard Disk Drives
5–179
REQUEST SENSE Command (03h) (continued)
Table 5–86 Supported Additional Sense Codes and Sense Code Qualifiers (in Hex)
Sense Key
Sense
Code
Sense
Qualifier
Meaning
00h NO SENSE
00
00
No Specific Sense Key Information to be
Reported for Designated Logical Unit
0B
01
SMART Overtemperature Trip
5D
00
SMART Tripped
5D
01
SMART Triggered due to READ or WRITE
TA Factor
5D
02
SMART Triggered due to READ or WRITE
Error Factor
5D
0B
Spin Failure Retry Threshold Exceeded
5D
FF
SMART Test Trip
5E
00
Power Management Enabled
5E
01
Power Management Enabled, Drive is in
IDLE Sub-State (Idle Timer Timed Out)
5E
02
Power Management Enabled, Drive is in
STANDBY Sub-State (Standby Timer Timed
Out)
5E
03
Power Management State = “Sleep”
01h RECOVERED ERROR
02
00
No Seek Complete
03
00
Write Fault, Recovered
03
01
Pre-Amp WRITE Unsafe, Recovered
09
00
Track Following Error, Recovered
0B
01
SMART Overtemperature Trip
0C
00
Write Error, Recovered
0C
01
Write Error, Recovered with Auto
Reallocation
15
02
Positioning Error Detected by Read of
Medium
15
03
Positioning Error Detected by Read,
Recovered
15
04
Servo Write Not OK Assertion, Recovered
15
05
Servo Read Not OK Assertion, Recovered
15
06
Spoke Address Error, Recovered
15
80
Positioning Error Detected by READ on
WRITE: Recovered
15
81
Servo WRITE Not OK Assertion: Recovered
15
82
Servo READ Not OK Assertion: Recovered
16
00
Data Synchronization Mark Error
16
05
Spoke Synchronization Mark Error,
Recovered
16
83
Spoke Synchronization Mark Error,
Recovered
(continued)