Request sense command (03h) (continued) – Quantum 10K II User Manual
Page 245
SCSI Description
5–178
Quantum Atlas 10K II Ultra160/m SCSI Hard Disk Drives
REQUEST SENSE Command (03h) (continued)
Table 5–85 Sense Key Information Field Contents (continued)
Command
Sense Key
Field Contents
WRITE(6)(10)
RECOVERED/MEDIUM ERROR
The address of the first bad sector found
during the write. (Possible only when
PER=1, DTE=0, and DCR=0.) For a
RECOVERED ERROR, the last Logical Block
Address in the error is returned; for a
MEDIUM ERROR the first Logical Block
Address is returned.
WRITE AND VERIFY
RECOVERED/MEDIUM ERROR
WRITE(6)(10) error recovery qualifiers
apply. This field contains the Logical Block
Address that may have failed the write or
verify (compare) operation. For a
RECOVERED ERROR, the last Logical Block
Address in the error is returned; for a
MEDIUM ERROR the first Logical Block
Address is returned.
WRITE LONG
RECOVERED/MEDIUM ERROR
Write (10) error recovery qualifiers apply.
The information field echoes the WRITE
LONG command’s Logical Block Address.
ILLEGAL REQUEST
The transfer length residue (requested
minus correct length) if the transfer length
is wrong. Note: ILI will be set.