Quantum 10K II - Manual (Page 229)

SCSI Description
5–162 Quantum Atlas 10K II Ultra160/m SCSI Hard Disk Drives
RECEIVE DIAGNOSTIC RESULTS Command (1Ch) (continued)
Table 5–76 Translate Address Page — Field Descriptions
Field Description
Supplied Format The Supplied Format field specifies the format of the following Translate
Address field. Must be 000b, which specifies the LBA format.
RAREA Reserved Area is not used. Must be 0.
ALTSEC An Alternate Sector bit of 1 indicates that the translated address from the
SEND DIAGNOSTIC command is physically located in an alternate sector
on the disk.
When ALTSEC is 0, it indicates either that no part of the translated
address is located in an alternate sector of the medium or that the drive
is unable to determine this information.
ALTTRK An Alternate Track bit of 1 indicates either that part or all of the
translated address is located on an alternate track of the medium or, the
drive cannot determine if all or part of the translated address is located
on an alternate track.
When ALTTRK is 0, it indicates that no part of the translated address is
located on an alternate track of the medium
Translate Format The Translate Format field specifies the format into which the initiator
wants the address translated. The value must be 101b, specifying the
Physical Sector format.