LEICA TPS1200 - Manual (Page 104)

104 TPS1200 Check & Adjust
6. TOOLS T-Axis Adjustment Accuracy
Shows the number of runs executed. One run consists of
a measurement in face I and face II.
<σ a T-axis:> shows the standard deviation of the determined tilting axis
error. The standard deviation can be calculated from the second run
onwards.
)
It is recommended to measure at least two runs.
7. MEAS (F5) if more runs have to be added. Continue with step 3.
OR
CONT (F1) to accept the measurements and to proceed to TOOLS T-Axis
Adjustment Result. No more runs can be added later.
Step Description