Setting up taos itp, Taos itp configuration – Spectra Logic Spectra 12000 User Manual
Page 72
72
Spectra 12000 User Guide
[4] IP subnet mask:
IP network mask (standard IP parameter).
[5] IP gateway:
Gateway address (standard IP parameter).
[?] Help:
Displays help for this menu.
[Esc]
Returns you to the main menu
Setting Up TAOS ITP
TAOS ITP Configuration
As shipped, the E-QIP can be accessed by any host on the network that
can see its IP address. Setting up ITP protocol security lets you limit
access to the unit by filtering IP address ranges. To launch the ITP
Configuration menu, select
4
.
[1] ITP security:
Select to set ITP security so that only those hosts in
specified IP ranges can read/write to the E-QIP.
Figure 7-5 The ITP Configuration menu.