Sanyo DSR-3016 - Manual (Page 88)

POWER FAILURE/USED TIME DISPLAY
1
Press the MENU button to select POWER FAILURE/USED
TIME, and then turn the shuttle dial clockwise.
The POWER FAILURE/USED TIME sub-menu appears.
Check details such as the date and time of the power failure and
the usage time for the hard disk.
2
Press the EXIT/OSD button.
The display returns to the normal screen.
About the sub-menu
1 FAILURE
Shows the date/time when a power failure occurred.
The number of power failures appears at the left. (example: #020)
When the number exceeds 999 it returns to 000.
2 RECOVER
Shows the date/time when power was restored.
3 DISK1 USE
Shows the total hard disk 1 usage time.
4 DISK2 USE
Shows the total hard disk 2 usage time (when a hard disk has
been added).
5 POWER
Shows the total usage time for this unit.
MOVE LINES WITH JOG, SELECT WITH SHUTTLE
POWER FAILURE
#001 FAILURE 02-12 07:22
RECOVER 02-15 10:20
USED TIME
DISK1 USE : 00003H
DISK2 USE : -----H
POWER : 00358H
FIRMWARE : MAIN 1.10-00 / SUB 1.01-00
Main menu Sub-menu
1
2
3
5
4
MENU
POWER FAILURE
#0044 FAILURE 02-12 07:22
RECOVER 02-15 10:20
USED TIME
DISK1 USE : 00003H
DISK2 USE : -----H
POWER : 00358H
FIRMWARE : MAIN 1.10-00 / SUB 1.01-00
EXIT/OSD
English 87