Sanyo DSR-3016 - Manual (Page 71)

GENERAL SETTING
ALARM : ON
DISK FULL : ON
DISK ERROR : ON
LOCK WARNING : ON
KEY IN : OFF
NON REC : OFF
LEVEL PASSWORD(4-8) USE
ADMIN -------- OFF
USER -------- OFF
REC CONTROL : USER
CONTROL : RS-232C
DATA SPEED : 19200
STATUS INFO : ¤¤¤
ALARM INFO : ¤¤¤
ADDRESS : ¤¤¤
LAN CARD : LAN1
NETWORK CONTROL : ON (DISPLAY: ON)
IP ADDRESS : 192.168. 0. 1
SUBNET MASK : 255.255.255. 0
GATEWAY : 0. 0. 0. 0
PORT : 00080
ID : PASSWORD (4-8)
ID1 : 1111----
ID2 : 2222----
ID3 : 3333----
DATE : ON
TIME : ON
QUALITY : ON
AUDIO : ON
ALARM COUNT : ON
ALARM TYPE : ON
TITLE : ON
@ TITLE SET ->
VIDEO LOSS : TEST
COLOR LEVEL : AUTO
DISK1 : 80GB
DISK2 : ---GB
DISK INITIALIZE ->
CAUTION : ALL RECORDING WILL BE ERASED!
MIRRORING : OFF
PLAYBACK DRIVE : ¤¤¤
CAUTION : RECORDING SPEED WILL BE
LIMITED BY MIRRORING!
MOVE LINES WITH JOG, SELECT WITH SHUTTLE
1.DISPLAY SET ->
2.BUZZER SET ->
3.SECURITY LOCK SET ->
4.RS-232C/RS-485 SET ->
5.HDD SET ->
6.NETWORK SET ->
MOVE LINES WITH JOG, SELECT WITH SHUTTLE
These settings relate to buzzer operation.
A buzzer can be made to sound when an
alarm is detected or a hard disk problem
occurs.
Displays settings such as the date and
time and the image quality on the
monitor.
In addition, the number of alarms and
types of alarm can also be displayed.
Sets titles.
Changes the video loss settings.
Changes the color level settings.
Settings for RS-485 only
• Allows status information to be
transmitted.
• Allows alarm information to be
transmitted.
• Changes address settings.
Changes the network card settings.
Sets the hard disk to use for playback
when mirroring is being used.
Sets mirror recording.
Initializes the hard disk.
Changes the data speed setting.
Selects the control method.
Changes the security lock settings.
Changes the network operation settings.
Lets you enter an IP address.
Lets you enter a subnet mask.
Lets you enter a gateway.
Lets you set three levels of user
passwords.
Sets the port.
Main menu DISPLAY SET menu A
BUZZER SET menu B
SECURITY LOCK SET menu C
RS232C/RS-485 SET menu D
HDD SET menu E
NETWORK SET menu F
70 English