Sanyo DSR-3016 - Manual (Page 7)

PART NAMES
G MENU button and indicator
Used to display the menu screens (setting screens).
H ZOOM button and indicator
Used to display the zoom screen in a single screen during image
monitoring or playback.
The indicator flashes when the zoom screen is displayed.
I Automatic camera switching button and indicator
(SEQUENCE)
This button is used to automatically change the camera images
that are being monitored in the single-screen, 4-screen or
quarter-screen (plus-screen) display.
When the SEQUENCE button is pressed, the indicator flashes and
the screen changes automatically. The camera indicator also
changes to match the images on the screen.
J REC/STOP button and indicator
Use to start normal recording.
The indicator illuminates during recording.
If the button is pressed for 2 seconds or more during recording,
recording stops and the indicator switches off.
K EXIT/OSD button and indicator
•
When a menu screen is displayed
The main menu or sub-menu is exited.
•
During recording, playback or while stopped
If the button is pressed during recording or playback,
superimposed information such as time and date and alarm
status changes in the following order:
Displayed at top
→
Displayed at bottom
→
Not displayed
The indicator illuminates while information is displayed.
L SEARCH button and indicator
If the button is pressed during recording or while the digital video
recorder is stopped, the indicator illuminates and the search
playback screen is displayed. If the button is pressed once more,
the search playback screen is exited.
M COPY button and indicator
If this button is pressed while the images being played back in a
single screen are paused, the paused image is copied to the
archive area of the hard disk or to a CompactFlash card,
microdrive or CD-R drive.
The indicator illuminates during copying.
If the button is pressed during recording or while the digital video
recorder is stopped, backups (copying to DAT) can be carried out.
N TIMER button and indicator
When the button is pressed when recording is stopped, the digital
video recorder switches to timer recording standby mode, and
when the setting time is reached, timer recording starts.
O PLAY/STOP button and indicator
The indicator illuminates and playback of images in the normal
recording area and alarm recording area starts.
If pressed during playback, playback stops.
P STILL button and indicator
When this button is pressed while images are being monitored or
played back in a single screen, the indicator illuminates and the
screen images are paused.
If it is pressed again, playback resumes.
Q SHUTTLE HOLD button and indicator
If this button is pressed continuously for 2 seconds or more when
the security lock has been set, the security lock is activated.
This locks the speed for playback and frame advance.
The indicator illuminates while locked.
R ALARM buttons ( û ALARM ù )
When these buttons are pressed during playback, playback skips
to the previous or next alarm recording.
S Jog (inner) and shuttle (outer) dials
•
During playback
The jog dial changes the playback speed.
The shuttle dial fast-forwards and rewinds.
•
Menu screens
The jog dial moves the cursor and changes settings.
The shuttle dial accepts settings.
T CompactFlash card slot
Insert a CompactFlash card or microdrive here.
U MENU RESET button
Used to initialize menu settings (displayed menu settings only).
If this button is pressed while images are being monitored, the
time is reset (0 minutes and 0 seconds).
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
MULTI
MENU EXIT/OSD
ZOOM
SEQUENCE COPY SHUTTLE LOCK
JOG SHUTTLE ENT
ER
CL
EA
R
TIMER
PLAY/STOP
STILL
REC/STOP
POWER FULL ALARM FULL LOCK ALARM
PLUS
QUAD
MON2
S
T
U
Q R
1 3 4 5 7 8 K L G H O P
I 9 F 6 J N M
2
(DSR-3016)
ALARM
SEARCH
6
English