Sanyo DSR-3016 - Manual (Page 74)

GENERAL SETTING
5
Press the EXIT/OSD button.
The display returns to the normal screen.
C SECURITY LOCK SET setting
Passwords for this digital video recorder can be set by the
Administrator or the User or both. Setting passwords enables
privileges to be set for recording and playback operations. After the
security lock has been set, if someone other than the password setter
touches an operating button on the digital video recorder, the buzzer
will sound and a password must be entered. Therefore, be sure to
make a note of the password.
Operating privileges and security lock
☞ Administrator password setting
Example: To set the password to “ 123456AB”
1
Press the MENU button to select GENERAL SET, and then
turn the shuttle dial clockwise.
The GENERAL SET sub-menu appears, and the cursor is
positioned at DISPLAY SET.
2
Use the jog dial to move the cursor to SECURITY LOCK SET,
and then turn the shuttle dial clockwise.
The SECURITY LOCK SET sub-menu appears, and the cursor
moves to ADMIN.
Note:
•
“LEVEL PASSWORD (4-8) USE” is a title and cannot be changed.
•
If ADMIN is set to “OFF”, the user password cannot be set.
•
The password can consist of between four and eight alphanumeric
characters.
3
Turn the shuttle dial clockwise.
The first password entry bar flashes.
4
Use the jog dial to display “ 1” , and then turn the shuttle dial.
The second password entry bar flashes.
•
The characters that can be used in the password are: 0, 1, ...
9, A, B, C, ... Z
Note: This can also be set using the numeric keys. (See page 43.)
5
Use the jog dial to display “ 2” , and then turn the shuttle dial.
The third password entry bar flashes.
6
Repeat this procedure to continue entering “ 3456AB” , and
then turn the shuttle dial clockwise.
The cursor moves to “OFF” and flashes.
7
Use the jog dial to change the setting to “ ON” , and then turn
the shuttle dial clockwise.
The cursor moves to USER.
8
Set User password.
Carry out B User password setting. If the User setting is not to
be done, this is complete.
Use the jog dial to move the cursor to REC CONTROL and carry
out the recording and playback operating privilege setting.
(See page 74.)
Note: If setting a 4-character password, leave the 5th character as "-"
and then turn the shuttle dial clockwise.
EXIT/OSD
MENU
LEVEL PASSWORD(4-8) USE
ADMIN -------- OFF
USER -------- OFF
REC CONTROL : ADMIN
ADMIN -------- OFF
ADMIN 1------- OFF
ADMIN 11------ OFF
LEVEL PASSWORD(4-8) USE
ADMIN -------- ON
USER -------- OFF
REC CONTROL : ADMIN
English 73