Sanyo DSR-5716P - Manual (Page 157)

156
English
ADVANCED MENU SET 8
INTRODUCTION
SE
TTINGS
NE
T
W
O
R
K
CO
NT
RO
L
NETW
ORK
O
P
E
RATION
NE
T
W
ORK
S
E
TTINGS
OTHE
R
OPE
RATION
9
Turn the jog dial to select “TIME TO
SYNCHRONIZE” and then turn the
shuttle dial clockwise.
“01” flashes.
10
Set “TIME TO SYNCHRONIZE”.
Set the time to synchronize. The time is synchronized with the
clock on the NTP server and updated each day at the
specified time.
Hours: Select from 01 to 23.
Minutes: Select 00, 10, 20, 30, 40, or 50.
Example: 10:30
(1) Turn the jog dial to select “10” and then turn the shuttle
dial clockwise.
“00” (minutes) flashes.
(2) Turn the jog dial to select “30” and then turn the shuttle
dial clockwise.
Default setting: 01:00 (Time is updated at 1 AM.)
11
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
TIME ZONE
GMT Dublin, Lisbon, London
SYNC. WITH NTP SERVER : ON
NTP SERVER ADDRESS : 192.168.001.020
TIME TO SYNCHRONIZE : 01:00
TIME ZONE
GMT Dublin, Lisbon, London
SYNC. WITH NTP SERVER : ON
NTP SERVER ADDRESS : 192.168.001.020
TIME TO SYNCHRONIZE : 10:30
EXIT/OSD