Sanyo DSR-5716P - Manual (Page 105)

104
English
RECORD SET 2
INTRODUCTION
SE
TTINGS
NE
T
W
O
R
K
CO
NT
RO
L
NETW
ORK
O
P
E
RATION
NE
T
W
ORK
S
E
TTINGS
OTHE
R
OPE
RATION
Use this setting to indicate how alarms are to be detected.
1
Press the [MENU] button.
The MENU indicator lights up and the
2
Turn the jog dial to select “2.RECORD
SET” and then turn the shuttle dial
clockwise.
3
Turn the jog dial to select “7.ALARM
REC MODE SET” and then turn the
shuttle dial clockwise.
The screen is displayed.
4
Turn the jog dial to select “ALARM
TRIGGER” and then turn the shuttle dial
clockwise.
“ALARM” flashes.
5
Turn the jog dial to select an alarm
detection method and then turn the
shuttle dial clockwise.
The cursor moves to “MOTION SENSOR”.
[Settings] (‹ indicates default setting)
*1 External alarm
z
Switch is attached to the ALARM IN terminal on the rear
panel and alarm is detected by opening and closing the
switch.
[Setting conditions]
z
When “SENSOR”, “ALARM AND SENSOR” or “ALARM
OR SENSOR” is selected, the motion sensors must be set.
6
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
Setting alarm triggers
MENU
ALARM RECORDING : OFF
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ***
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ***
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->
Setting Description
‹ ALARM
Alarm recording is performed when
an external alarm
*1 occurs.
SENSOR
Alarm recording is performed when
a motion sensor detects movement.
(JP.105)
ALARM AND SENSOR
Alarm recording is performed when
both the external alarm
*1 and a
motion sensor are activated
simultaneously.
ALARM OR SENSOR
Alarm recording is performed when
either the external alarm
*1 or a
motion sensor is activated.
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : OFF
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->
EXIT/OSD