Sanyo DSR-5716P - Manual (Page 136)

SCREEN SET 4
English
135
3
Turn the jog dial to select “4.SCREEN
SET” and then turn the shuttle dial
clockwise.
The screen is displayed.
4
Turn the jog dial to select “FULL” for
“2.SEQUENCE SET” and then turn the
shuttle dial clockwise.
“1S” flashes for “FULL”.
5
Turn the jog dial to set the interval to
“INDIV.” and then turn the shuttle dial
clockwise.
Set the main monitor and monitor 2 display period for each
camera.
6
Turn the shuttle dial to select “MAIN/
MON. 2 MONITOR SET” and then turn
the shuttle dial clockwise.
The
7
Turn the shuttle dial clockwise.
“T-1” flash for “TIME PERIOD”.
8
Turn the jog dial to select the time
period and then turn the shuttle dial
clockwise.
The cursor moves to “1S” for “01” and “MAIN MON.”.
[Settings] (‹ indicates default setting)
If the time period is set to “ALL DAY LONG”, the display is
fixed to “T-1 (00:00-24:00)”.
9
Turn the jog dial to select the channel to
be changed for “MAIN MON.” or
“MON.2” and then turn the shuttle dial
clockwise.
“1S” flashes.
On the DSR-5709P, set for cameras No. 01 through 09.
1.MULTI SCREEN : NORMAL
QUAD POSITION SET ->
MULTI 9 POSITION SET ->
MULTI 16 POSITION SET ->
2.SEQUENCE SET
FULL : 1S QUAD : 1S
MAIN/MON.2 MONITOR SET ->
3.MASK : OFF
MASK SET ->
4.COLOR LEVEL SET ->
1.MULTI SCREEN : NORMAL
QUAD POSITION SET ->
MULTI 9 POSITION SET ->
MULTI 16 POSITION SET ->
2.SEQUENCE SET
FULL : 5S QUAD : 1S
MAIN/MON.2 MONITOR SET ->
3.MASK : OFF
MASK SET ->
4.COLOR LEVEL SET ->
Setting Description
‹ T-1 Sets time period T-1.
T-2 Sets time period T-2.
T-3 Sets time period T-3.
T-4 Sets time period T-4.