Sanyo DSR-5716P User Manual

Page 103

102

English

RECORD SET

INTRODUCTION

SE
TTINGS

NE
T

CO
NT
RO
L

NETW

ORK

RATION

NE
T

ORK

TTINGS

OTHE

OPE

RATION

Use the following procedure to set the recording rate and
time.

Settings cannot be made for “PRE-ALARM RECORDING”
when “ALARM REC” is set to “OFF”.

Press the [MENU] button.

The MENU indicator lights up and the

is
displayed.

Turn the jog dial to select “2.RECORD

SET” and then turn the shuttle dial

clockwise.

Turn the jog dial to select “7.ALARM

REC MODE SET” and then turn the

shuttle dial clockwise.

The screen is displayed.

Turn the jog dial to select “PRE-ALARM

RECORDING” and then turn the shuttle

dial clockwise.

“OFF” flashes.

Turn the jog dial to select “ON” and

then turn the shuttle dial clockwise.

The cursor moves to “REC RATE”.

[Settings] ( indicates default setting)

Turn the shuttle dial clockwise.

“12.5” flashes.
(Default setting: 12.5FPS)

To set pre-alarm recording

ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : OFF
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->

Setting

Description

OFF

Pre-alarm recording is disabled.

Pre-alarm recording is enabled.

ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ON
REC RATE: 12.5FPS, DURATION: 5SEC
ALARM TRIGGER : ALARM
MOTION SENSOR ->

This manual is related to the following products:

DSR-5709P