Sanyo DSR-5716P - Manual (Page 122)

GENERAL SET 3
English
121
8
Turn the shuttle dial clockwise.
“OFF” flashes for “ALARM INFO”.
9
Turn the jog dial to select “ALARM
INFO” setting and then turn the shuttle
dial clockwise.
The cursor moves to “ADDRESS”.
[Settings] (‹ indicates default setting)
10
Turn the shuttle dial clockwise.
“001” flashes for “ADDRESS”.
11
Turn the jog dial to select the
“ADDRESS” setting and then turn the
shuttle dial clockwise.
[Settings] (The default setting is “001”)
When connecting a camera with remote operation capability,
set this address between “001” and “008” and make camera
control settings. (JP.150)
12
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
Setting Description
ON Alarm information is transmitted.
‹ OFF Alarm information is not transmitted.
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001
[KEY]
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001
Setting Description
000 - 127 Sets the address of the digital video recorder.
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001
EXIT/OSD