Integra CROMA24 User Manual
Page 103

Assembly\Disassembly
103
ASSEMBL
Y/
DISASSEMBL
Y
Croma24 Service Manual
Figure 5-8. Paper and Encoder Sensor Removal.
2.
To remove the Paper Sensor:
a.
Unlock the connector at J3 and remove the flex cable.
b.
Turn the Carrier Assembly over and hold it while firmly
grasping the Paper Sensor between thumb and index finger.
See Figure 5-8.
c.
Pull straight up on the Paper Sensor and remove it from
the Carrier Assembly.
3.
To remove the Encoder Sensor:
a.
Unlock the connector at J2 and remove the flex cable.
b.
Turn the Carrier Assembly over and lay it with the top
side facing down.
c.
Push down on the plastic clip and at the same time push
down on the Encoder until the plastic pieces on each side of