H3C Technologies H3C S5800 Series Switches - Manual

1
RPS Ordering Guide for
H3C Low-End Series Ethernet Switches (V1.03)
RPS Overview
Brief Introduction
Hangzhou H3C Technologies Co., Ltd. (hereafter referred to as H3C) offers four models of redundant
power system (RPS) units as external DC power supply systems for multiple Ethernet switch models. These
RPS models are RPS500-A3, RPS800-A, RPS1000-A3, and RPS1600-A.
The RPS500-A3 and RPS800-A are single-input and single-output RPS units, and the RPS1000-A3 and
RPS1600-A, adopting 1+1 redundancy, provide two power module slots. The RPS1000-A3 and
RPS1600-A come with one power module by default, and you can use two power modules as needed to
enhance the power supply capability of the RPS. The power module models of the RPS1000-A3 and
RPS1600-A are FLATPACK1500 and AD162M56-1M1, respectively.
Table 1 lists the technical
specifications of the RPS models.
Table 1 Technical specifications of the RPS models
RPS model
Input
voltage
range
Number of
output
interfaces
Output
voltage/output
current
Maximum power output
RPS500-A3
100 VAC to
240 VAC
1
Available outputs:
• –50 V/7.5 A
• +12 V/10.5 A
• –50 V output only: 375 W
• +12 V output only: 125 W
• –50 V and +12 V outputs
concurrently: 500 W
RPS800-A
100 VAC to
240 VAC
1
Available outputs:
• –54 V/12 A
• +12 V/17.25 A
• –54 V output only: 650 W
• +12 V output only: 210 W
• –54 V and +12 V outputs
concurrently: 650 W
2 –54 V/25 A
RPS1000-A3
6 –54 V/8 A
Maximum power output when all the
eight outputs are working:
• With two power modules: 2900 W
• With one power module: 1450 W
2 –55 V/25 A
RPS1600-A
For each
power
module:
100 VAC to
240 VAC
6 –55 V/8 A
Maximum power output when all the
eight outputs are working:
• With two power modules: 3200 W
• With one power module: 1600 W